Connection Issues

Learn how to troubleshoot WaiveGO connection issues, resolve Wi-Fi and network problems, and ensure reliable access and seamless digital waiver submissions.

Updated Nov 21, 2026

Connection Troubleshooting

WaiveGO is a cloud-based digital waiver management system that relies on a stable internet connection to deliver, complete, and securely submit waivers. If guests or staff are experiencing slow loading times, difficulty accessing waivers, or errors when submitting completed waivers, the issue may be related to your local network or internet connection.

This guide will help you identify and resolve common connectivity issues to keep your waiver operations running smoothly.

Troubleshooting Your Internet Connection

Several factors can affect the performance of WaiveGO, particularly when using tablets, kiosks, or other devices connected to a wireless network.

1. Check Your Wireless Network

Your wireless router or access point provides the connection between your devices and the internet. Weak Wi-Fi signals, network congestion, or equipment issues can affect how quickly WaiveGO loads and processes waivers.

To troubleshoot your wireless connection:

  1. Verify that your device is connected to the correct Wi-Fi network.
  2. Open a web browser and visit another website to confirm your internet connection is working.
  3. Open your WaiveGO waiver link and attempt to complete and submit a test waiver.
  4. If possible, connect a computer to your network using an Ethernet cable and repeat the test.

Understanding your results:

  • WaiveGO works over Ethernet but not Wi-Fi: The issue may be related to your wireless network, signal strength, or access point.
  • WaiveGO does not work over either connection: The issue may be related to your internet service, network configuration, or access to WaiveGO.
  • Only one device is experiencing issues: The problem may be specific to that device or its network connection.

If you suspect an issue with your wireless network, try the following solutions.

A. Check Wi-Fi Signal Strength

Ensure your device has a strong Wi-Fi signal. Weak signals can cause slow loading times, connection interruptions, and failed waiver submissions.

If your signal is weak, move closer to an access point or consider improving wireless coverage in areas where guests complete waivers.

B. Restart Your Network Equipment

A temporary network issue may be resolved by restarting your router or wireless access point.

If you are authorized to manage your network equipment, restart the affected device using the manufacturer's recommended procedure. Allow the network to reconnect before testing WaiveGO again.

C. Limit Network Congestion

When multiple guests and devices share the same wireless connection, network congestion can affect performance.

For businesses with high guest traffic, we recommend using a dedicated, password-protected network for operational devices whenever possible.

D. Evaluate Your Network Equipment

Consumer-grade routers may struggle to support large numbers of connected devices, especially in high-volume environments.

If your facility uses multiple waiver kiosks, tablets, or guest-facing devices, consider commercial-grade networking equipment designed for higher device capacity.

E. Compare Wired and Wireless Performance

Run an internet speed test on a wired computer and compare the results with a device connected to Wi-Fi.

If your wired connection performs significantly better, your wireless network may need additional coverage, configuration adjustments, or upgraded equipment.

2. Check Your Internet Service Provider (ISP)

If your wireless network appears to be working correctly but WaiveGO is still loading slowly or experiencing connectivity issues, your internet service provider may be contributing to the problem.

To troubleshoot your internet service:

  1. Connect a computer directly to your network using an Ethernet cable.
  2. Visit Speedtest.net to test your download speed, upload speed, and latency.
  3. Compare the results with the speeds included in your internet service plan.
  4. If your speeds are significantly lower than expected, restart your network equipment if appropriate and run the test again.
  5. If the issue continues, contact your internet service provider for assistance.

Recommended Connection Speeds

WaiveGO does not require an exceptionally fast internet connection for basic waiver submissions. However, facilities operating multiple devices simultaneously should have enough available bandwidth to accommodate all connected users.

As a general starting point, we recommend:

  • Download speed: At least 20 Mbps
  • Upload speed: At least 5 Mbps
  • Connection stability: A consistent connection with minimal packet loss and interruptions

These are general network planning recommendations, not minimum technical requirements for WaiveGO. Facilities with many simultaneous users may require additional bandwidth.

3. Troubleshoot Individual Devices

If WaiveGO is working on other devices but not on a specific tablet, kiosk, or computer, the issue may be isolated to that device.

Try the following:

  1. Confirm that the device is connected to the internet.
  2. Close and reopen the browser or WaiveGO interface.
  3. Refresh the waiver page and attempt to load it again.
  4. Ensure your browser and device operating system are up to date.
  5. Restart the device if the issue continues.
  6. Test the same waiver on another device to determine whether the issue is device-specific.

If a browser continues to experience problems, try opening WaiveGO in a different supported browser.

Important: Before refreshing a page or restarting a device, be aware that any waiver information not yet successfully submitted may be lost. Confirm that completed waivers have been received before clearing browser data or resetting devices.

4. Check Network Security Settings

Some business networks use firewalls, content filters, VPNs, or other security policies that can interfere with access to cloud-based applications.

If WaiveGO works on a different network but not on your facility's network, contact your IT administrator to investigate possible restrictions.

Your IT team should verify that:

  • Devices can establish secure HTTPS connections.
  • DNS resolution is functioning correctly.
  • Firewall or content-filtering policies are not blocking required WaiveGO services.
  • VPNs or network security tools are not interfering with application connectivity.

Avoid disabling network security protections as a troubleshooting shortcut.

Still Experiencing Connection Issues?

If you have completed the troubleshooting steps above and are still having difficulty accessing or submitting waivers, contact the WaiveGO Support Team for further assistance.

To help us investigate your issue quickly, please provide:

  • Your business or organization name.
  • A description of the issue you are experiencing.
  • The approximate date and time the issue occurred.
  • The type of device and browser being used.
  • Whether the issue affects one device or multiple devices.
  • Any error messages or screenshots associated with the problem.

Our team can help determine whether the issue is related to your local network, device configuration, or the WaiveGO platform.

WaiveGO — Simplifying Waivers. Accelerating Experiences.

Was this article helpful?

Have more questions? Submit a request